Filter
Loading...
These are the replacement lanyards for the slider pins, works with all Voile slider pin models. Sold as a pair. These are the replacement lanyards for the slider pins, works with...
A wise accessory to compliment the Voile Light Rail Bindings. This kit contains all the spare parts you may require to repair a potentially dangerous backcountry binding breakdown A wise accessory to compliment the Voile Light Rail Bindings. This...
This splitboard crampon works only with Voile Light Rail Splitboard Bindings 2012/2013 or later. For steep, icy, and exposed ascents or that frustrating icy skin track, there is the Voile splitboard crampon. Used with Voile splitboard skins, the Voile splitboard crampon can function fixed to your splitboard or mobile for easy walking. The fixed mode is... This splitboard crampon works only with Voile Light Rail Splitboard...
Voile Puck Alignment Guide accurately and quickly allows you to dial in your stance width and angles of the Voile Universal Splitboard Hardware. Voile Puck Alignment Guide accurately and quickly allows you to...
The Slider Pin secures the Slider Track to the splitboard in tour and ride modes. The stainless steel cable lanyard is attached to your binding to prevent the pin from being lost in the backcountry. It is advisable to carry a spare. The Slider Pin secures the Slider Track to the splitboard in tour...
The crampon is attached to the board half using a longer Slider Pin made specifically for the crampon. This Slider Pin can work for securing your Slider Track for ride mode as well. The crampon is attached to the board half using a longer Slider Pin...
The Slider Pin for Light Rail secures the Light Rail binding (2012 or newer) to the splitboard in tour and ride modes. The stainless steel cable lanyard is attached to your binding to prevent the pin from being lost in the backcountry. It is advisable to carry a spare. The Slider Pin for Light Rail secures the Light Rail binding (2012...
Set of 4 Hooks. Includes all screws, bushings and nuts to mount to your splitboard. This parts kit is not for the split-your-own-boards, but for factory build splitboards. The difference is in the type of screw that is used to attach the hook to the board half. Set of 4 Hooks. Includes all screws, bushings and nuts to mount to...
The slider tracks are required to mount regular snowboard bindings to the Voile Puck system. The slider tracks are required to mount regular snowboard bindings...
Increase your uphill touring rotation and enhance your edging ability while side-hilling with the new Voile Splitboard Touring Riser. This 10mm riser, especially with larger boots, increases the rotational angle of your binding and prevents the boot toe from hitting the deck of your board. It will also give you more leverage and boot/binding angulation to... Increase your uphill touring rotation and enhance your edging...
Includes 4 pucks, 4 puck gaskets, 2 universal discs - in-line slot, 2 universal discs - parallel slot, 8 - M6 x 12mm truss-head screws, and alignment guide. Includes 4 pucks, 4 puck gaskets, 2 universal discs - in-line slot,...
M6 T-nut for the DIY split kit. T-nuts are used to mount the touring bracket, climbing heels and pucks. M6 T-nut for the DIY split kit. T-nuts are used to mount the...